3 in stock (can be backordered)
LOCTITE 222 Low Strength Threadlocker Adhesive 50ml (22250)
$47.18 inc. GST
LOCTITE threadlocking products prevent self-loosening and secure any threaded fastener against vibration and shock loads. They are easy-flowing liquids which completely fill the gaps between mating threads. When used to assemble threaded fasteners, LOCTITE threadlockers permanently secure threaded assemblies and eliminate fretting corrosion. LOCTITE threadlockers are single-component liquid and semi-solid adhesives. They cure at room temperature to a hard solid thermoset plastic when applied between steel, aluminium, brass and most other metal surfaces. They cure in the absence of air. The adhesive completely fills the gaps between mating threads to lock threads and joints.
LOCTITE 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. t is proven to be tolerant of minor contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids.
Advantages of LOCTITE
• Prevent unwanted movement, loosening, leaks and corrosion
• Resist vibration
• Single-component – clean and easy to apply
• Can be used on all sizes of fasteners – reduce inventory costs
• Seal threads – allow through-hole tapping
3 in stock (can be backordered)
Description
Product Description
• Prevents loosening on vibrating assemblies
• Medium strength
• Permits disassembly with hand tools
• Especially suited to small thread sizes
• Lubricates threads during assembly
• Cure time is 24 hours
• Easy to remove components
• Ideal for non-ferrous components, e. g. brass and aluminium
• Low viscosity of 1,500 mPa.s
• Operating temperature ranges between -55°C and 150°C
Technical Data
Chemical Basis |
Methacrylate |
Colour |
Purple |
Fluorescence |
Yes |
Max Thread Size |
M36 |
Service Temperature Range |
-55°C and 150°C |
Strength |
Low |
Breakaway Torque |
6 Nm |
Thixotropy |
Yes |
Viscosity |
900 – 1,500 mPa.s |
Fixture Time: Steel |
15 min |
Fixture Time: Brass |
8 min |
Fixture Time: Stainless Steel |
360 min |
Notes |
General Purpose |
Reviews
There are no reviews yet.